ScratchShield – Bucket 20.5L + ScratchShield Filter “Wash”

The filter ensures that sand and grit remain at the bottom of the bucket, keeping the wash water clean and greatly reducing the risk of scratches.

The bucket contains a ScratchShield logo with the text WASH

The bucket contains a ScratchShield logo with the text Rinse , this bucket is to rinse your wash mitt before you put it back in the bucket Wash .

The bucket contains a ScratchShield logo with the text Wash , this bucket is for clean washing water with your favorite shampoo.

Consisting of,

• Bucket 20.5 liter Wheels , Rinse , Wash
• ScratchShield filter (black)

How to use:

1. Place the Scratch Shield on the bottom of the bucket.
2. Rub the Washmitt or sponge in the bucket over the Scratch Shield each time to remove the dirt.
3. The dirt disappears to the bottom of the bucket and will stay there.
4. For optimum safety, use two buckets to wash the car/motorcycle/truck etc., one to rinse out the wash mitt (Rinse) and one to always take up clean soapy water (Wash).

Benefits of the Scratch Shield:

• The filter ensures that sand and dirt can sink to the bottom so that they cannot damage the paint.
• The Filter fits buckets with a diameter of 238mm measured 65mm from the bottom.
• Sand and dirt do not stay on the Shield.
• Foot plates ensure that the water remains calm and that dirt does not rise to the surface.
• The adjustable legs give the scratch field a stable surface.

How to use:

1. Place the Scratch Shield upside down in the center of the bucket with the pegs for the base plates facing up. Make sure the Scratch Shield is always centered.
2. Position the numbered base plates in order so that their ends touch the bucket. Do not press them down until the correct fit is achieved.
3. When you are satisfied with the result, turn the ScratchShield over and apply pressure to the top to click the base plates into place.